导航
skype

中文版

English

新闻中心
Check category
Your location：
Homepage
/
News
/
Company News
/
Is there still an opportunity to import aluminum alloy ingots in 2020?

Is there still an opportunity to import aluminum alloy ingots in 2020?

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-03-08 17:51
  • Views:0

(Summary description)In the fourth quarter, approvals for imported aluminum scrap decreased, and downstream demand picked up slightly, resulting in a shortage of domestic aluminum scrap, prompting a sharp increase in the price of domestic ADC12 aluminum alloy ingots. In addition, in the case of a shortage of scrap aluminum, various international trade companies are relatively active, causing a large number of imported aluminum alloy ingots to be imported into the country. Until recently, the domestic ADC12 price peaked, and the overseas ADC12 price rose significantly, and the approvals for imported aluminum scrap in Q1 of 2020 increased significantly, the popularity of imported ADC12 aluminum alloy ingots decreased slightly. So in 2020, is there still a chance to import aluminum alloy ingots?

Is there still an opportunity to import aluminum alloy ingots in 2020?

(Summary description)In the fourth quarter, approvals for imported aluminum scrap decreased, and downstream demand picked up slightly, resulting in a shortage of domestic aluminum scrap, prompting a sharp increase in the price of domestic ADC12 aluminum alloy ingots. In addition, in the case of a shortage of scrap aluminum, various international trade companies are relatively active, causing a large number of imported aluminum alloy ingots to be imported into the country. Until recently, the domestic ADC12 price peaked, and the overseas ADC12 price rose significantly, and the approvals for imported aluminum scrap in Q1 of 2020 increased significantly, the popularity of imported ADC12 aluminum alloy ingots decreased slightly. So in 2020, is there still a chance to import aluminum alloy ingots?

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-03-08 17:51
  • Views:0
Information
In the fourth quarter, approvals for imported aluminum scrap decreased, and downstream demand picked up slightly, resulting in a shortage of domestic aluminum scrap, prompting a sharp increase in the price of domestic ADC12 aluminum alloy ingots. In addition, in the case of a shortage of scrap aluminum, various international trade companies are relatively active, causing a large number of imported aluminum alloy ingots to be imported into the country. Until recently, the domestic ADC12 price peaked, and the overseas ADC12 price rose significantly, and the approvals for imported aluminum scrap in Q1 of 2020 increased significantly, the popularity of imported ADC12 aluminum alloy ingots decreased slightly. So in 2020, is there still a chance to import aluminum alloy ingots?

Scan the QR code to read on your phone

Previous： Increase in primary aluminum consumption Can aluminum alloy ingots show bright spots?
Next： None
Previous： Increase in primary aluminum consumption Can aluminum alloy ingots show bright spots?
Next： None

Recommended news

Gas and non-metallic inclusions in the ingot 2021-03-08
The slag mixed into the ingot or other non-metallic impurities falling into the ingot are called non-metallic inclusions. The fracture features are black strips or flakes, and the microstructure features are mostly black linear, massive, and flocculent disordered tissues, with obvious color difference from the matrix. Non-metallic inclusions are an important cause of delamination and many surface defects in aluminum processed products. In the heat treatment and heating process, the presence of non-metallic inclusions can promote the formation of secondary porosity and bubbles. In terms of mechanical properties, non-metallic inclusions are places where stress is concentrated, which reduces the strength limit and elongation of the alloy. In particular, the reduction in transverse elongation and dynamic mechanical properties (impact toughness, fatigue strength and fracture toughness) is more serious. In addition, non-metallic inclusions will also reduce the stress corrosion resistance of the alloy.
Segregation of chemical composition in ingot 2021-03-08
Segregation of chemical components in ingots The phenomenon of uneven distribution of chemical components in ingots is called segregation. In the wrought aluminum alloy, the segregation mainly includes intragranular segregation and reverse segregation.
Cause Analysis and Solutions of Eight Defects in Casting Aluminum Alloy Ingots 2021-03-08
In the production process of cast aluminum alloy ingots, if it is not properly controlled, various product defects will often occur, especially aluminum-silicon alloys such as ADC12 and A356. This article analyzes the causes and solutions for the defects of eight common aluminum alloy ingots for your reference.
Aluminum prices are under pressure, costs are intensifying, and the winter of aluminum alloy ingot market is not over 2021-03-08
Near the end of 2017, spot aluminum ingot prices did not usher in the expected rise, but ushered in a change in the issue of reduced production during the heating season. This has also brought a lot of impact to aluminum alloy ingot companies. On the one hand, the price of aluminum alloy ingots has dropped, and on the other hand, the price of scrap aluminum has fallen slowly. Near the end of the year, various regions have experienced "gas shortage" one after another, natural gas prices have risen, and aluminum alloy ingot production and supply have decreased. Faced with such a situation, can the consumption of aluminum alloy ingots usher in a breakthrough? Can the price of aluminum alloy ingots be supported by the end of the year?
Increase in primary aluminum consumption Can aluminum alloy ingots show bright spots? 2021-03-08
With the advent of 2018, the stock of spot aluminum ingots remains high, there is no bright spot in downstream consumption, and the overall market demand is weak. This has also led to a trend of low and fluctuating aluminum prices even when production is restricted during the heating season. In this context, everyone has set their sights on the post-holiday. When the new electrolytic aluminum production capacity is put into production, will the downstream consumer end usher in a recovery or new growth points, and will the aluminum price rise come early? We make the following analysis on the demand for the aluminum alloy ingot market.
Is there still an opportunity to import aluminum alloy ingots in 2020? 2021-03-08
In the fourth quarter, approvals for imported aluminum scrap decreased, and downstream demand picked up slightly, resulting in a shortage of domestic aluminum scrap, prompting a sharp increase in the price of domestic ADC12 aluminum alloy ingots. In addition, in the case of a shortage of scrap aluminum, various international trade companies are relatively active, causing a large number of imported aluminum alloy ingots to be imported into the country. Until recently, the domestic ADC12 price peaked, and the overseas ADC12 price rose significantly, and the approvals for imported aluminum scrap in Q1 of 2020 increased significantly, the popularity of imported ADC12 aluminum alloy ingots decreased slightly. So in 2020, is there still a chance to import aluminum alloy ingots?

CONTACT INFORMATION

Address: Longzhou South Road, Circular Economy Industrial Park, Miluo, Hunan

微信公众号

Scan and follow us

Copyright © 2020 Miluo Lianchuang Aluminum Technology Co., Ltd. All rights reserved.       湘ICP备08105094号-1      by：www.300.cn changsha